Quick and simple mounting with using just one tool for all modular components! The ergonomic K2-handles are available in tool-locking, cylinder locking - or in non-locking version. Attaching handles can be done at the last possible time  - after the door is shipped to its place of installation. The latching unit is the focal point of the K2-system. It is installed into the insulated door - and when the screw is turned, expanding "legs" are engaged and fix the door skins from the inside of the door. The K2 roller cam is also quick to install - and is adjustable so that the door closes smoothly and is seculely shut with optimal compression on the sealing profile. It is easy to set thank´s to the cast-in scale on the side, allowing for adjustments between 0-20 mm. The roller cam works well with multi-point latching. For inside options, you will find For walk-in systems, (over 160 cm internal height) internal emergency handles should be installed. Several other product are also available, and they may all be attached at the point of destination for the full HVAC-unit.

For inside options, you will find (over 160 cm internal height) internal emergency handles should be installed in "walk-in systems" (over 160 cm internal height). Several other product fur multi-point latching are also available, and they may all be attached at the point of destination for the full HVAC-unit.sizing ac units for house Hinge with quick-release function allows for complete removal  of the door ocr door attachment without the need of any tool. wall ac units cheapExternal mounting with universal left/right mounting and 180° opening angle.european ac units K2-handles with different locking functions: See catalogue page 2-315d. Patented latching units with spacer sleeves, shaft and collars: see catalogue page 2-315c. Adjustable roller cam K2.