Buying a new HVAC system for your home can be a great expense and you need to make sure you get your money’s worth. The way your new calgary air conditioning system is installed can make a big difference on how it performs and how much it will affect the price of your energy bills. By choosing the right professionals, you will be able to get the assistance needed to get the right results from your new unit. Rather than neglecting to do the proper research on the companies in your area, you will be able to reduce the room for error that exists with a job like this. Here are some of the most common problems that can happen when getting a new unit put in. This is probably the most common mistake that an air conditioning technician will make. Most people will believe that bigger is better, but when you’re talking about HVAC units this is not the case. If you have a system installed that is too big for your home it will cause problems such as insufficient cooling and will increase the cost of your energy bills substantially.

You should make sure that the unit you have installed is right for the amount of square footage it will be covering. There are many factors that go into determining the size of ductwork your home will require. Having ductwork that is insufficient in size can cause your unit to be less efficient and have to work harder. The repeated overworking of your system will cause your air conditioning compressor to wear out faster, which can be a considerable expense. If your overflow drains are installed improperly by a contractor, it will increase the risk of leaking. The water that leaks can make its way through your walls and ceilings. This water can cause extensive damage to your home and flood your system so bad that is may have to be replaced. If the water drains are not at the right pitch, then it will be nearly impossible for the moisture to be removed from the ductwork. Without the hiring of a reputable and experienced HVAC company, a homeowner will have a very hard time getting the right results from the installation of a new unit.

DIY Removal is Very Problematic Another very common problem that may arise when trying to get a new unit is a DIY removal of the old one. In order to get the old unit out and the new one in, professionals will have to take time to get the job done right. Some homeowners think that they can save some money by trying to get their old unit removed on their own. This will usually lead to a variety of issues that can make getting a new unit in place nearly impossible. 3 1 2 ton ac unit pricesThe time that is put into finding a professional to help with this type of work is more than worth it.what gauge wire for ac unit Improper Charging of the New unitcleaning an air conditioner wall unit Once a new HVAC unit is in place, it will have to be properly charged with refrigerant.

If the unit does not have the right type of refrigerant in place, then it will be very hard for a unit to perform as intended. Only the professionals will be able to check and put in the refrigerant that is needed in order to keep a unit in good shape. The more that a homeowner is able to do during the installation process to keep their unit safe, the better equipped they will be to keep it in place without damages over the years. The money that is paid to a professional for this work is essential in getting the job done right. Getting Other Parts of the System Replaced When a company is hired to do this type of work, they will usually take the time to research other parts of the system. This will help them to figure out whether or not other elements of the system will need to be replaced. In some instances, things like the thermostat a system has will need to changed out due to age and repair issues. Leaving broken pieces of the system in place when a new unit is installed will usually end up causing more problems.

Allowing professionals to troubleshoot the system for other issues is the only way that a homeowner will be able to get their new unit in place and working efficiently in a hurry. Be sure to pick a reputable and knowledgeable HVAC technician, to ensure that these problems don’t happen to you. Researching the track record that a company has is a great way to narrow down the selection. Experience in the industry is a must and something that the homeowner needs to pay attention to when trying to make the right hire. About Latest Posts Latest posts by Rinkesh (see all) Causes, Effects and Solutions of Soil Degradation 10 Tips For a More Sustainable Garden Why is it Important To Go Green Starting Today? Reliable, energy-efficient, clean air for your home. go to trane residential Parts, supplies and technical information for your research and repair. Go To TRANE SUPPLY Or find a residential distributor in your area Outside of North America ? Go to Trane Global

As you know, our primary focus on PowerTips is to provide you with tips, tactics, and techniques for building a strong, consistently profitable remodeling company. But sometimes we just need to make sure you’re on top of the latest industry news! This week we’re proud to have Stefanie Petersen with Ferguson to share the key changes to HVAC Efficiency standards in 2015. In April 2014, the U.S. Department of Energy (DOE) confirmed upcoming changes for HVAC efficiency standards for residential and commercial equipment. However, according to a survey by Emerson Climate Technologies Inc., 74 percent of contractors are unaware of the change and how to best prepare their staff and inventory to meet customer demand and new regulations. Below are key aspects every remodeler should know. New Seasonal Energy Efficiency Ratio (SEER) standards will be enforced for air conditioners and heat pumps installed on or after January 1, 2015; however, standards differ by region. The current 13 SEER standard for air conditioners will move to 14 SEER in most areas, but 13 SEER air conditioning units can still be sold in the northern region.

The most significant product change regarding the new regulations involves all split-system heat pumps. All regions will move from 13 SEER and 7.7 HSPF, Heating Seasonal Performance Factor, to the new national heat pump efficiency minimum of 14 SEER and 8.2 HSPF. Additionally, the changes also affect the FTC EnergyGuide label, commonly referred to as the yellow “hang tag”, attached to the heating and cooling system. The label contains SEER and HSPF ratings for the unit in relation to similar models. Instead of a single rating point, new labels for split-system air conditioners and heat pumps will now be shown in a range representing the lowest and highest SEER ratings for all the condenser’s certified coil combinations. This means all of the component parts in the entire system, inside and out, must have an aggregate SEER that meets the new guidelines. Education surrounding the new standards is key, as enforcement will begin in less than five months. Remodelers and contractors should be able to identify that the equipment being installed meets the minimum standards of the new regulations as well as meets the needs of the customer.