Ultra Series: Variable Speed (UA20) Efficiency offers minimum of 20 SEER and 13 EER system performance across all capacities. Copeland Scroll Variable Speed Compressor Achiever Plus Series: Two-Stage (UA17) Efficiencies up to 17 SEER/13 EER Achiever Series: Single Stage (RA16) Efficiencies up to 16 SEER/13 EER Scroll compressorComposite base pan for quieter operationAchiever Series: Single Stage (RA14) Efficiencies of 14 SEER to 16 SEER (Optimized for Southern Region Efficiency Standards)Scroll compressorComposite base pan for quieter operationAchiever Series: Single-Stage (RA14**W) Efficiencies of 14 SEER to 16 SEER (Optimized for Southwest Region Efficiency Standards) Composite for quieter operation Achiever Series: Single Stage (RA13)Efficiencies 13-15.5 SEER/11.5-13 EERScroll compressorComposite base pan for quieter operation DXZ925/935 Finding Bass & Treble ERROR CODES - WHAT DO THEY MEAN? How do I change the tuner frequency spacing for use outside the U.S.?

How do I set the clock? How many CD changers can my CeNET source unit control? What Clarion radios are Sirius Satellite Radio ready? What do the letters in the model number of my Clarion unit mean? What is the wiring code for my Clarion unit?best way to run ac unit What remote works with the 1999 and up source units?how to set up a ac unit Why can't I access my bass and treble controls?how much should new ac unit cost Why is the clock on my radio acting like a counter? CAVW2 with a RED DOT on the packaging and with only one black wire coming out of it is the correct piece. This one is compatible all VW MONSOON systems. We had a few sent out that had two wires coming out of it. One Yellow and one Black.

These units will not work with the MONSOON systems but will work with NON-MONSOON systems. Return to the top of the page Accessing the Bass and Treble adjustments: 1.Turn on head unit to any source. 2.Press the “ADJ” button for 1 to 2 seconds, until a submenu will appears on the display. 3.Press the Right Tuning button until “AC-PII SEL E” appears on the display, and then    press “ENTER.” 4. “AC-PII PRO/STD” will appear on the display, using the rotary volume knob, select either     “AC-PII PRO” or “ AC-PII STD” mode. 5.Press the Right Tuning button, then “EQ SELECT” will appear on the display. 6.Use the Rotary Volume knob to select “EQ BAS/TREB,” then “ADJ” to save selection. 7.Press the “EQ” button to access Bass and Treble adjustments and the Rotary Volume    knob to adjust the level. Press the “EQ” button to exit the audio adjustment mode. Error 1.Battery inside CD Changer needs to be replaced.

Error 2.CD error message. Mechanism has as eject problem or takes a long time to select            CD. Error 3.CD error message. The pick-up is out of focus during play mode due to scratches on            the disc or contamination.Reconnect the data cable. Error 5.CD error message. Could not read correct data due to CD ROM. Error 6.CD error message. Could not read data from disc because it is upside-down. Error 8.Tape Drive system defective. Eating tape or something wrong with the drive system. Error 9.Weak RF. Try alternate frequencyNo CD is magazine or no magazine in CD Changer. With our C-Bus units, press and hold the BAND button, and move the Alpha Touch left or right. With our CeNet units, press and hold the RANDOM button, and PRESET #1 to change from U.S. to European frequencies. Each press of the PRESET #1 button will cycle the tuner frequencies. There are several methods to set the clock, depending on the model. Press and hold the BAND and DISPLAY buttons to display the clock

Press and hold the BAND and DISPLAY buttons until the time display flashes SEARCH left to adjust the hours; right to adjust the minutes Press BAND button to store the time Same as Method 1, except press DISP to store the time SEARCH left or right to select clock and press ENT SEARCH left or right to select the hour or minute Turn rotary knob clockwise or counter-clockwise to set the correct time Press enter to store the time Press ADJ to return to the previous mode Press and hold the BAND and FUNCTION buttons to display the clock Press and hold the BAND and FUNCTION buttons until the display flashes Search left to adjust hours; right to adjust minutes While the display is showing the clock, press and hold the CLOCK knob until the minutes flash Press the CLOCK knob to adjust the minutes When the CLOCK knob is released for 5 seconds, the hours will flash Press the CLOCK knob to adjust the hours When the CLOCK knob is released for 5 seconds, the time will be stored

A total of four changers can be connected to a CeNet source unit. The CCA-519 Y adapter will connect two changers; one more adapter is required for each additional changer All Clarion 2001 Clarion CeNet radios with AUX inputs are Sirius Satellite Radio ready. The Joyride source unit is also Sirius Satellite radio ready through it's AUX input Clarion uses the industry standard wiring colors. Not every unit will have all of the listed wires White = Left Front + White/Black = Left Front – Gray = Right Front + Gray/Black = Right Front – Green = Left Rear + Green/Black = Left Rear- Violet = Right Rear + Violet/Black = Right Rear – Yellow 14ga = Battery Main/Memory Yellow 18ga = Battery CeNET Power/Memory Red = Accessory (ignition on) Blue = Antenna Turn On + Blue/White = Remote Turn On (amps) + Brown = Phone Mute Orange or Mint Green= Parking Brake Video Lockout White/Red = CCD (camera) input instant on +