How much does a Payne air conditioning unit cost? explains that the price for a Payne air conditioning unit can vary widely, between $1,900 and $6,500 per unit, according to the contractor used and the model. This is because Payne units are not available by retail, but instead are sold directly to the contractors. The larger the air conditioning unit, the higher the total installed price. A 13 SEER unit costs a contractor between $1,900 and $5,500, depending on region and the amount of work necessary for the installation. For a larger 16 SEER unit, the price rises to typically about $2,400 to $6,500. The prices include labor costs, which also vary greatly by region. A gas furnace consists of two parts, an outdoor air conditioning unit and indoor furnace that work together to draw in, heat and circulate winter air and c... What is a dual air brake system? Where can you read 2013 air purifier reviews? Where can you buy a Charmglow ventless heater? Where can you buy anthracite coal by the bag?

Do you require a Class B CDL license to drive a vehicle with air brakes? Which of the two companies sells cheaper products, Rheem or Trane?What is the AC Condenser Fan all about? The AC condenser converts the AC gas (refrigerant) into a liquid form. In this process, it generates a lot of heat in the AC system. The job of the AC condenser fan is to remove the heat from the AC system by blowing air across the condenser. By removing the heat from the system, it keeps the pressure in the AC system down allowing the AC to provide the coolest air possible. If you use the AC when the fan is not working, the AC will generate hot air. It will severely damage the major components in the AC system. Use the gauge to measure the pressure. Verify fan is not turning on when AC is on. Check for power and ground at AC fan. Check AC fan relay and fuses. Remove and replace faulty fan assembly. Check for proper operation of the fan. What common symptoms indicate you may need to replace the AC Condenser Fan?