Many factors are involved when determining what size of an air conditioner or furnace would have the required power output to cool or heat your home. Generally speaking, however, if you live in the Greater Toronto Area or Southern Ontario, you may use the following charts to estimate the correct size of the heating or cooling product that you may need for your home. It is very critical in the installation of furnaces and air conditioning systems that you are recommended the right size unit most suitable for your home. Under- or oversizing can cost you performance, comfort and efficiency related issues when it comes to both the furnace and the air conditioner. Undersizing will, of course, result in the unit being unable to meet the desired temperature setting. Aside from the issue of your comfort, undersizing the equipment and/or material will most likely lead to the premature failing of the units. This being said, it is as important to make certain that the units are not oversized, either.

It is rather a quite often observed misconception of consumers that the more powerful the furnace or the air conditioner, the better heating and cooling performance that will be achieved. Oversizing a furnace will result in many different shortcomings. First of all, what is most important in having a uniform distribution of the warm air is the optimum runtime of the furnace. The same statement is also true for an air conditioning unit with respect the uniform distribution of the cool air. When going with a more powerful hvac unit, it will satisfy the temperature setting quicker than when it should and it will not run that optimum length of cycle for you to have a uniform temperature everywhere in your home and the existence of those hot and cold spots in the house is inevitable in that case. With an oversizing of the gas furnace, there also exists a great chance for the overheating of the furnace. This is mostly caused because in the case of oversizing of a furnace, the existing ducts in the home will not support such high volumes of air flow causing pressure build-up in the return air duct and therefore overheating.

Also, do keep in mind that the maximum level of efficiency with the gas consumption of a gas furnace is achieved when the right size furnace is installed in your home. In fact, the right size furnace should almost continuously run during the coldest day of the year. Of course, it should be able to satisfy your desired temperature setpoint. Aside from the non-uniform air distribution, oversizing an air conditioner will lead to uncomfortable and higher humidity levels in your home. As you know, an air conditioner is also meant to dehumidify the air. This is done through the indoor evaporator coil - installed inside the plenum (duct above the furnace) - that removes moisture and water vapour from the airflow passing through. When the air conditioner is oversized, it will stop running sooner than the optimum length of time it needs to run in order to also dehumidify the air. Another misconception is also the belief that by going with a bigger size furnace or air conditioner, there br will saving on fuel/electricity costs as a result of the units working less, which is certainly not the case.

You always require the same amount of energy in order to heat or cool your house. window ac unit for horizontal windowThe factor that determines this consumption is not the power rating; wall art ac unitit is the efficiency of the unit. how big is a 3 ton ac unitWhen the furnace or A/C is more powerful, it will use more power in a shorter period whereas a smaller size furnace or A/C would end up using the same energy but in the manner of less power in a longer period - which works out to have the same consumption levels. In fact, in the case of an oversized unit, some energy is wasted and the maximum efficiency of the unit would not be achieved. Keep in mind that the following furnace output power estimates are aside from the furnace's nominal power ratings.