The AC-Safe Universal Light-Duty Air Conditioner Support is designed to help provide secure installation for air-conditioning units that weigh up to 80 lb. Transfers the weight of the air conditioner from the window sash and sill to the support and window frame for safety Minimizes the chance of damage to the window, window parts or outside wall Supports up to 80 lb. Compatible with 4 - 11 in. thick walls Heavy-gauge, epoxy-coated steel construction for durability Nylon fixtures and neoprene rubber mounting pads Bubble level sets the proper angle for condensate runoff Indoor installation helps to eliminate the need for exterior work Includes all necessary hardware 3 can this be removed with changes in season? the screws seem rather permanent... 3 wouldn't this bracket make the ac unit sit a tad above bottom of inside window casing? Is bracket screwed to inside window sill? 3 What is the load bearing capacity? How heavy of an air conditioner can this support bracket hold?

2 Will this AC support work on a mobile home, there is no outside window sill? If not any recommendation.. Will this AC support work on a mobile home, there is no outside window sill? 8,000 BTU 115-Volt Compact Slide-Out Chassis Air Conditioner/Heat Pump with Remote Control 12,000 BTU 230/208-Volt Window Air Conditioner with Cool, Heat and Remote 8001 BTU ENERGY STAR 115-Volt Electronic Through-the- Window Room Air Conditioner 7,500 BTU 115-Volt Window Air Conditioner with Cool, Heat and Remote 18,000 BTU 230/208-Volt Window Air Conditioner with Cool, Heat and Remote ENERGY STAR 115-Volt Electronic Room Air Conditioner 6,000 BTU 115-Volt Window Air Conditioner with Remote 12,000 BTU Window Air Conditioner with Remote 8,000 BTU 115-Volt Window Air Conditioner with Remote and ENERGY STAR 5,000 BTU 115-Volt Window-Mounted Mini-Compact Air Conditioner with Full-Function Remote Control 23,000 BTU 230/208-Volt Window Air Conditioner with Cool, Heat and Remote

5,000 BTU 115-Volt Window Air Conditioner 24,000 BTU 230-Volt Electronic Heat/Cool Room Air Conditionerchoosing the right window ac unit ENERGY STAR 230-Volt Electronic Room Air Conditionerhome central air conditioner reviews 10,000 BTU 115-Volt Window Air Conditioner with Remote and ENERGY STARcost of ac repair car 25,000 BTU 230-Volt Window-Mounted Heavy-Duty Air Conditioner with Temperature Sensing Remote Control 5,000 BTU Window Air Conditioner 18,000 BTU Window Air Conditioner with Remote Saves valuable floor space in IT environmentsSaves energy with efficient close-coupled coolingProvides 7,000 BTU/h (2.0 kW) of cooling capacitySupports optional remote management via EthernetIncludes hardware for easy mounting in 19 in. racks

Ideal for enclosures with perforated doors(not for use in enclosures with solid/plexiglass/glass doors)When using a bottom-mounting configuration, the enclosure’s floor must be open with no tray or pan below SRCOOL7KRMEvaporator coils can be vented through enclosure’s rear perforated doors or optional SRCOOL7KDUCT(no solid doors)In an open frame application, cooling air delivered to the equipment is lessened, since cold air escapes into the room. Condenser must be ducted using the SRCOOL7KDUCT. The SRCOOL7KRM Rack-Mounted Air Conditioning Unit pumps 7,000 BTU/h(2.0 kW) of close-coupled cooling power into your IT equipment to prevent shutdowns, malfunctions and failures caused by overheating. This space-saving, energy-efficient unit is perfect for data centers, server rooms, network closets and other environments with heat-sensitive rack-mounted equipment and limited floor space. The self-contained SRCOOL7KRM mounts just like any other rack equipment in 8U of space at the top or bottom of a rack enclosure.

A magnetic air dam attaches to the front door of the rack enclosure to ensure that equipment draws cool air from the SRCOOL7KRM instead of drawing warm air from the room. Because it only cools the equipment inside the rack enclosure, the SRCOOL7KRM is much more efficient than solutions that cool an entire room to achieve the same result. The SRCOOL7KRM filters the air, and its built-in evaporator eliminates condensation, as well as the need for a floor drain or water collection tank. The 7-foot cord plugs into a standard 15A(NEMA 5-15R) outlet. The unit restarts automatically after power failures, and you can use the built-in timer to schedule unattended shutdown and startup. The intuitive control panel includes a digital display and diagnostic LEDs to communicate operating conditions at a glance.The optional SRCOOLNET2 remote management accessory(sold separately) allows you to monitor temperatures, receive alerts, review logs and control settings over the Ethernet network from any location via SNMP, Web, SSH or telnet.

The SRCOOLNET2 accessory also includes an ENVIROSENSE® temperature and humidity sensor that allows you to link cooling output with temperature readings up to 12 feet away. Compact and Efficient Cooling Saves valuable floor space in IT environments with available rack spaceSaves energy with efficient close-coupled cooling, cooling only the equipment inside the rack enclosure instead of the entire roomProvides 7,000 BTU/h(2.0 kW) of cooling capacity in a rack-mounted 8U chassisPrevents equipment shutdowns, malfunctions and failures caused by overheating and temperature fluctuationsUses environmentally friendly R410A refrigerantConvenient Operation Directional output vent aims cool air upward or downward, allowing the unit to operate from the bottom or top of the rack enclosureSupports unattended shutdown and startup, including automatic restarts after power failuresIntuitive front-panel controls with an informative digital display and diagnostic LEDsOperates at noise levels comparable to an average office settingRemote Management Support Optional SRCOOLNET2 remote management accessory(sold separately) allows you to monitor temperatures, receive alerts, review logs and control settings over the Ethernet network from any location via SNMP

, Web, SSH or telnetSRCOOLNET2 includes ENVIROSENSE temperature and humidity sensor that allows you to link cooling operation with temperature readings up to 12 ft. awayOptional SRCOOL7KDUCT Exhaust Duct KitDirects and disperses heat from SRCOOL7KRM through an upper vent into your facility’s ventilation systemSold separatelyEasy Installation Plugs into a standard 15A outlet(NEMA 5-15R)Built-in evaporator eliminates condensation—no floor drain or water collection tank neededMagnetic air dam attaches to rack enclosure’s front door to optimize airflowIncludes mounting hardware for installation in EIA-standard 19 in. rack enclosures SRCOOL7KRM SmartRack 7,000 BTU 120V Rack-Mounted Air Conditioning UnitMagnetic air dam kit Directional 1U Cable Pass-Through Panel with Brush Strip Rack Air Conditioners & Cooling Equipment 1U Blanking Panel Kit, Toolless-Mounting, 10 pieces SmartRack® Exhaust Duct Kit for SRCOOL7KRM SNMP/Web Interface Card, Remote Cooling Management